THE PRODUCTS
- Brushes can be an easy and relatively effective option to seal the bottom of a door onto a hard surface.*
- There are different brush lengths to suit most gap sizes.
- If the home is in a windy area use an automatic bottom door excluder.
*Best used for internal doors and external timber sliding doors.
- All are self adhesive, but some can be screw fixed.
- Mostly, do not use over carpet.
- Brushes are ALWAYS black - no other brush colour choices.
- The ‘colour’ refers to the carrier.
A. CARRIER
the aluminium section that has the self adhesive tape on the back and a groove for the brush pile to fit into
B. BRUSH PILE
comes in different lengths
● Self adhesive brush seal
● Suitable for fitting externally
● Most suited to a timber sliding door to seal the trailing edge
* Refer to the Timber Sliding Door Kit for more details
● A short 13mm brush pile
● 1000mm long
● Carrier available in Bronze or Silver
● Tall carrier that makes for easy screw fixing
● Not normally used on metal or aluminium doors
● Suitable for screw fixing, but does not come with screws or holes
● Good surface preparation required if not being screw fixed
● Do not adhere to oiled or alkyd finishes, or easy clean wash and wear painted surfaces
● Fire rated to highest rating - BAL FSZ when used on a garage or on an approved side hung fire door in accordance with AS 3959
● Warranty: 2 years on seals. No warranty on self adhesive products
● Self adhesive brush seal
● Suitable for fitting internally
● Most suited for bathroom, toilet and internal laundry doors
* Refer to the Internal Zoning Door Kit for more details
● 19mm brush pile
● 915mm long
● Carrier available in Bronze, Silver or Gold
● Inexpensive
● Not usually screw fixed
● Good surface preparation required
● Do not adhere to oiled or alkyd finishes, or easy clean wash and wear painted surfaces
● Not suitable for bottom of door where floor rises
● Fire rated to highest rating - BAL FSZ when used on a garage or on an approved side hung fire door in accordance with AS 3959
● Warranty: 2 years on seals. No warranty on self adhesive products
● Self adhesive brush seal
● Suitable for fitting internally
● Most used for fitting to bottom of door where gaps is greater than 19mm
*Refer to the Timber Sliding Door Kit for more details
● 25mm brush pile
● 1000mm long
● Carrier available in Bronze or Silver
● Tall carrier that makes for easy screw fixing
● Good surface preparation required if not being screw fixed
● Do not adhere to oiled or alkyd finishes, or easy clean wash and wear painted surfaces
● Can be used where there is some floor rise behind the door
● Fire rated to highest rating - BAL FSZ when used on a garage in accordance with AS 3959
● Warranty: 2 years on seals. No warranty on self adhesive products
● Self adhesive brush seal
● Suitable for fitting externally or internally
● Mostly used for fitting to bottom of door where there is a large gap or significant floor rise
● 50mm brush pile
● 1000mm long
● Carrier available in Bronze or Silver
● Tall carrier that makes for easy screw fixing
● Can be used successfully over a carpet
● When using over a carpet or externally screw fix
● Good surface preparation required if not being screw fixed
● Do not adhere to oiled or alkyd finishes, or easy clean wash and wear painted surfaces
● Fire rated to highest rating - BAL LOW when used in accordance with AS 3959
● Warranty: 2 years on seals. No warranty on self adhesive products
● Use where there is limited space at bottomof the door (shortest brush)
● Use on timber doors
● Can be used externally, but DO screw fix it (no screws or holes provided)
● Not suitable for aluminum doors
● Not suitable for an uneven floor
● Fit to bottom of door for zoning (bathroom, laundry, toilet)
● Suitable for rentals (no screw fixing)
● Do use on bottom of internal door for zoning
● Not suitable for aluminum doors
● Do not use externally
● Don’t use where there is a significant floor rise behind the door
● Do use on head and tread of external sliding doors (screw fixing recommended – no screws or holes provided)
● Do use on bottom of internal doors for zoning
● Not suitable for aluminum doors
● Where there is rising floor behind the door
● Use when there is a big gap
● Can potentially be used over a carpet
● Not suitable for aluminum doors
● Take care if screw fixing to an internal door if it’s a hollow core door
Incorrect measurement of the width of the door.*
Cutting the brush with a saw.*
Use side cutters or cutting part of pliers instead.
WHICH BRUSH?
A comparison of 4 Door Draught Excluders
Information and design by:
Source:
Copyright @ 2019 ecoMasterStore